Dimensioning
You can easily add custom dimensions using Dimension mode.
Creating a new dimension
Step 1 - Enable Dimension Mode
Insert a dimension by clicking + Create in the Actions Toolbar and choose Dimension or choose Dimension Mode from the Scene Toolbar. This will put you into Dimension mode.
Tip
You can also use the keyboard shortcut Ctrl + D to toggle Dimension mode on/off. See here for more helpful keyboard shortcuts.
Tip
You can toggle certain labels on/off to help make picking points easier. See here for more information.
Step 2 - Choose a start point for the Dimension
Click the snapping point where you would like to measure from. Intersection snaps also work for reference lines intersecting with other reference lines and member edges. The reference line hover effect is disabled in dimension mode.
Step 3 - Choose an end point for the Dimension
Click the snapping point you would like to measure to. Hovering over different points on a truss will activate different snaps.
Step 4 - Click the Save icon in the Scene Toolbar to save your dimension(s).
Tip
If you need to add multiple custom dimensions to a truss; you don't need to click the Save icon each time, you can wait until you have finished adding all of your dimensions and then click Save. Saved dimensions will appear on outputs like Truss Design Drawings and Shop Drawings.
Deleting an existing dimension
Step 1 - Enable Dimension Mode
Choose Dimension Mode from the Scene Toolbar to enter Dimension mode.
Step 2 - Delete the newest user dimension
Keep clicking the Delete newest user dimension icon in the Scene Toolbar until you have deleted all of the desired dimensions.
Last updated