# Layout Settings

<figure><img src="/files/ZPlOZjpkBCuJsQIp7wdL" alt="" width="563"><figcaption></figcaption></figure>

## Preferred Bevel Cut

Bevel cuts are must commonly found on hip systems, specifically with corner jacks and corner girders.

### Any Cut

Applies a single-cut bevel.

### Double Cut

Applies a double-cut bevel (refer to example below).

### None

Applies a square cut.

<figure><img src="/files/Vn2enP2JZzPC8w6ZqAcO" alt=""><figcaption><p>Double Bevel Cuts on Hip Trusses</p></figcaption></figure>


---

# Agent Instructions: Querying This Documentation

If you need additional information that is not directly available in this page, you can query the documentation dynamically by asking a question.

Perform an HTTP GET request on the current page URL with the `ask` query parameter:

```
GET https://docs.paragontruss.com/design/getting-started/tools-and-features/user-settings/layout-settings.md?ask=<question>
```

The question should be specific, self-contained, and written in natural language.
The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.