Reweb Profile Truss
Last updated
Last updated
Lets consider this case of a profile truss where one or more checks are over capacity. You can reweb the truss by adjusting the Max Panel lengths and/or choosing the number of panels in each Web Joint Segment.
Edit Truss
and choose Reweb Truss
Now you are in Reweb Truss mode. In this case you can see that the default is 8' max panel lengths for the top and 10' for the bottom.
Use the Max Panel Lengths Top and Bottom inputs to adjust the max length of your desired panels.
Edit Truss
and choose Reweb Truss
.Enter
key to save your changes.Tip
Hovering over a member will give you the length of that member
In order to web a truss as a gable, use the Make Gable
settings in the Reweb panel.
Edit Truss
and choose Reweb Truss
.Gable
in the Reweb Truss
panel. Optionally select Structural Gable
if needed.Tip
Tip
A continuous bearing is automatically added when gabling a truss via the Reweb Truss tool.
If you want to make a structural gable that preserves your manual webbing changes, we suggest using the tool under Edit Truss
Stud Spacing
and Studding Direction
by using the inputs in the panel. For Structural Gables, you can as-needed.