# Version 343

## Feature Updates

**Load Settings Presets**

You can now save a preset of load settings and apply it to any component or project element (buildings, levels, etc.). Saved presets can also be reused in other projects.

<figure><img src="/files/STTs7XTB2So50CkDksIS" alt=""><figcaption></figcaption></figure>

**Expanded support for Top Chord Bearings under TPI 1-2022**

We now have TPI 1-2022 support for the top chord bearing cases under Table 7.4-1

**Bottom Bevel Cut**

You can now specify a bottom bevel cut on any chord in Design. Bottom bevel cuts are noted on Truss Design Drawings and Shop Drawings.

<figure><img src="/files/jMezUpO86htwaZm2DNgr" alt=""><figcaption></figcaption></figure>

## Bug Fixes

* Fixed an issue where front-back plate pairs were sometimes not being generated at joints that are close to a stacked bottom chord splice
* Fixed some cases where invalid profiles could cause a crash during component insertion


---

# Agent Instructions: Querying This Documentation

If you need additional information that is not directly available in this page, you can query the documentation dynamically by asking a question.

Perform an HTTP GET request on the current page URL with the `ask` query parameter:

```
GET https://docs.paragontruss.com/release-notes/previous/version-343.md?ask=<question>
```

The question should be specific, self-contained, and written in natural language.
The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.