> For the complete documentation index, see [llms.txt](https://docs.paragontruss.com/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://docs.paragontruss.com/layout/how-to/create-layout-loads.md).

# Create Layout Loads

Layout loads let you place extra loads, such as corridor loading, a safe, heavy flooring, or a wall above a cantilever, directly in your layout. You draw the load once, and Paragon applies it to every truss underneath on the same level, so you don't have to add the same manual load to each design.

There are three kinds of layout load:

| Applied As    | Use it for                                                         | What each truss receives                                                                                              |
| ------------- | ------------------------------------------------------------------ | --------------------------------------------------------------------------------------------------------------------- |
| `Area (psf)`  | Loads spread over an area, such as a corridor or a storage room    | A distributed load (psf) where the area overlaps the truss                                                            |
| `Line (plf)`  | A wall or other line load, such as a wall above a cantilever       | A concentrated load (lbs) where the line crosses the truss, or a distributed load (plf) where it runs along the truss |
| `Point (lbs)` | A single concentrated load, such as a post or a piece of equipment | A concentrated load (lbs) on the truss under the point                                                                |

Area and line loads have a start and an end magnitude. To create a varying (trapezoidal) load, enter a different value for each.

{% hint style="info" %}
Note

Layout loads are labeled **(Beta)** while we continue to refine them. They are available on all paid plans.
{% endhint %}

### Create a layout load

Make the level where the load belongs the active level before you start.

#### Step 1 - Click `Create` and choose `Load (Beta)`

You can also right-click in empty space in the scene and choose Load (Beta), or right-click the Loads (Beta) folder in the right sidebar and choose Create Load (Beta). The Load Creation (Beta) panel opens, and the scene shows only the active level.

<p align="center"><img src="https://2476274629-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2Fx4iMKVYkWjHD3vmbybWf%2Fuploads%2Fvlzwc71k02dlAWqN4cbJ%2F1a_Menu_Load.png?alt=media&amp;token=4b4c335e-1c59-4266-ae2d-e7e1672ec6c1" alt=""></p>

{% hint style="success" %}
Tip

Press `Ctrl + Q`, type `L`, and press `Enter` to start a load from the keyboard.
{% endhint %}

#### Step 2 - Enter a name, such as `AreaLoad` in `Name`

The name shows when you hover over the load in the scene, and it is the name of the manual load added to each truss design. If you leave it blank, Paragon names the load from its type, chord, magnitude, and location.

#### Step 3 - Choose the kind of load, such as `Area (psf)` for `Applied As`

You can't change the kind of load after you insert it. To change it, delete the load and create a new one.

<p align="center"><img src="https://2476274629-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2Fx4iMKVYkWjHD3vmbybWf%2Fuploads%2F641OIv0HmTFqbvJMmXll%2F1b_LoadCreation.png?alt=media&amp;token=7a09b1d2-430e-49d5-9a67-12f78b5406b2" alt=""></p>

#### Step 4 - Enter the start magnitude, such as `50` in `Start (psf)`

For a line load, the field is Start (plf). For a point load, there is a single Magnitude (lbs) field; enter the load there and skip to Step 6.

#### Step 5 - Enter the end magnitude, such as `50` in `End (psf)`

Use the same value as the start for a uniform load. A different value makes a load that varies across the area's width, or from the start point to the end point of a line load (End (plf)).

#### Step 6 - Choose the type of load, such as `Dead` for `Load Type`

The options are Dead, Roof Live, Floor Live, Snow, Wind, and Rain. Each layout load has one load type. To add a live load and a dead load to the same area, create two layout loads in the same place.

#### Step 7 - Choose the chord, such as `Top Chord` for `Applied To`

The options are Top Chord and Bottom Chord.

#### Step 8 - Choose the load cases, such as `All load cases of this type` for `Load Cases`

The other option is All except moving load cases.

<p align="center"><img src="https://2476274629-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2Fx4iMKVYkWjHD3vmbybWf%2Fuploads%2F5DJ2QRK1LUr1BaIAOLr3%2F1c_AreaLoad.png?alt=media&amp;token=a1f750e0-0b63-4d0c-9774-f7ac5c47b774" alt=""></p>

#### Step 9 - Click `PICK` and place the load in the scene

What you place depends on the kind of load:

* **Area:** click to set the position. Then set the size and angle in Width, Length, and Rotation. Horizontal Anchor (Left, Center, Right) and Vertical Anchor (Upper, Center, Lower) set which part of the rectangle sits on the position point.
* **Line:** click to set the start point, then click PICK next to End and click to set the end point.
* **Point:** click to set the position.

While you place a point, the button reads PICKING; click it again to cancel. You can also type the X Coordinate and Y Coordinate. The usual Layout snapping applies.

<figure><img src="https://2476274629-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2Fx4iMKVYkWjHD3vmbybWf%2Fuploads%2FfkRzSuXo5XI6uaiiZvDZ%2F1e_Line%20Load.gif?alt=media&amp;token=57b8e33f-400e-4899-95a9-319e336b9bae" alt=""><figcaption><p>Adding a Line Load</p></figcaption></figure>

<figure><img src="https://2476274629-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2Fx4iMKVYkWjHD3vmbybWf%2Fuploads%2FSpscflnZaXprLh92swQP%2F1d_AreaLaod_ovrTruss.png?alt=media&amp;token=a1cf7d98-2f7e-49fe-b80b-05e82f8d8b2f" alt="" width="433"><figcaption><p>Area Load</p></figcaption></figure>

<figure><img src="https://2476274629-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2Fx4iMKVYkWjHD3vmbybWf%2Fuploads%2FZrgFSxropDeZ2sCXOWZj%2F1f_PtLoad.png?alt=media&amp;token=f53a84e4-7c57-4d6a-b1e5-efb4316ff407" alt="" width="416"><figcaption><p>Point Load</p></figcaption></figure>

#### Step 10 - Confirm the `Elevation`, `Building`, and `Level`

Elevation defaults to the top of the walls on the active level and only sets where the load is drawn. The level decides which trusses get the load: a layout load applies only to truss envelopes on the same level.

#### Step 11 - Click `INSERT`

INSERT stays unavailable until the load is fully placed. The new load is selected, saved, and listed in the Loads (Beta) folder in the right sidebar.

### How layout loads are applied to trusses

Paragon applies layout loads when it creates component designs from your truss envelopes. Each load becomes an ordinary manual load on the design, so you can review it in Paragon Design like any other load. See [Creating Additional Loads](https://docs.paragontruss.com/design/how-to/general/modify-project-and-component-settings/creating-additional-loads) for working with manual loads in Paragon Design.

* **Area loads** become a distributed load (psf) over the length of the truss that the area overlaps.
* **Line loads** that cross a truss become a concentrated load at the crossing, equal to the line load (plf) times the truss spacing. Line loads that run along a truss become a distributed load (plf) over the length they share.
* **Point loads** become a concentrated load (lbs) on the truss under the point.
* Loads are measured between the ends of the truss envelope. Overhangs aren't loaded.

<figure><img src="https://2476274629-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2Fx4iMKVYkWjHD3vmbybWf%2Fuploads%2FEoyKhuD74QneXHvxffSN%2F1h_ManualLoad.png?alt=media&amp;token=26bc14b7-db10-4001-a955-e1761d4c5949" alt=""><figcaption></figcaption></figure>

{% hint style="info" %}
Note

Truss envelopes that share one design must sit under the same layout loads. If they don't, Paragon warns you; regenerate the components to give them separate designs.
{% endhint %}

### Update trusses after changing layout loads

When you add, move, or edit a layout load after the trusses already have designs, update the designs with Regenerate Loading.

This applies to truss envelopes that already have component designs.

#### Step 1 - Select the truss envelopes under the load

Click a truss envelope, or hold Ctrl and click to select several.

#### Step 2 - Right-click a selected truss envelope and choose `Regenerate Loading (Beta)`

When it finishes, a message tells you how many designs were updated and how many were skipped because their loading is locked, or that there were no changes.

<figure><img src="https://2476274629-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2Fx4iMKVYkWjHD3vmbybWf%2Fuploads%2FMDVRUp6uwIHkDjhrJN2x%2F1g_RegenLoadingRtClick.png?alt=media&amp;token=0bd2c267-917a-4dd0-b49e-72fcbbdb5f39" alt=""><figcaption><p>Regenerate Loading</p></figcaption></figure>

<figure><img src="https://2476274629-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2Fx4iMKVYkWjHD3vmbybWf%2Fuploads%2F1LJzr59gqFb4IGHDq1VC%2F1ga_ResultinMessage.png?alt=media&amp;token=77c53dfa-a51a-42b5-9589-d39c9c58b601" alt=""><figcaption></figcaption></figure>

{% hint style="danger" %}
Warning

Regenerate Loading replaces only the loads that came from layout loads, and keeps manual loads you added in Paragon Design. Any changes you made in Paragon Design to a load that came from a layout load are lost. Change the layout load instead.
{% endhint %}

{% hint style="info" %}
Note

Line loads that cross a truss are converted using the truss spacing at the time loading is generated. After you change truss spacing, regenerate the loading.
{% endhint %}

### Edit, copy, and delete layout loads

* **Show or hide loads:** use the Loads (Beta) option in the Layout Options Toolbar. A load you are creating or have selected always shows.
* **Review a load:** hover over it to see its name and magnitude, such as AreaLoad (50 psf).
* **Edit a load:** double-click it, or right-click it and choose Edit Properties. The Load Properties (Beta) panel has the same fields as Load Creation (Beta), except Applied As.
* **Edit several loads:** hold Ctrl and click each load, in the scene or in the Loads (Beta) folder. In the Multiple Loads (Beta) panel you can change Load Type, Applied To, Load Cases, and Elevation for all of them. Magnitudes can be changed together only when all the selected loads are the same kind.
* **Move, rotate, mirror, or duplicate:** select one or more loads, then use MOVE, ROTATE, or MIRROR in the panel. You can also right-click a load and choose Duplicate Load, Move Load, Rotate Load, or Mirror Load. A copy keeps the original name.
* **Delete:** right-click and choose Delete Load, or Delete Loads when several are selected.

<figure><img src="https://2476274629-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2Fx4iMKVYkWjHD3vmbybWf%2Fuploads%2F8HCZj2W9fxtLYUilOMJW%2F1j_LoadsVisible.png?alt=media&amp;token=18b253fc-66e8-4135-9d01-d4c9b6fe5fc7" alt=""><figcaption><p>Load Visibility</p></figcaption></figure>

<div align="center"><figure><img src="https://2476274629-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2Fx4iMKVYkWjHD3vmbybWf%2Fuploads%2F0CIU6aAunx7k1c6xPimV%2F1i_RtClickProperties.png?alt=media&amp;token=56355fe2-6a16-40fc-920a-2ce608cd2258" alt=""><figcaption><p>Edit Loads</p></figcaption></figure></div>

<figure><img src="https://2476274629-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2Fx4iMKVYkWjHD3vmbybWf%2Fuploads%2Fu8ciwDjzB64Szb8Oxqz4%2FEdit%20Load.gif?alt=media&amp;token=a79dc801-2512-4c28-8a38-b97e1c321d53" alt=""><figcaption><p>Editing a Line Load</p></figcaption></figure>

### Limitations

* The kind of load can't be changed after it is inserted.
* Area loads are rectangles.
* A layout load applies to all load cases of its type, or all except moving load cases. You can't pick a single load case.
* Layout loads always act straight down.
* Designs with locked loading are skipped by Regenerate Loading.


---

# Agent Instructions
This documentation is published with GitBook. GitBook is the documentation platform designed so that both humans and AI agents can read, navigate, and reason over technical content effectively. Learn more at gitbook.com.

## Querying This Documentation
If you need additional information that is not directly available in this page, you can query the documentation by asking a question.

Perform an HTTP GET request on the following URL with the `ask` and `goal` query parameters:

```
GET https://docs.paragontruss.com/layout/how-to/create-layout-loads.md?ask=<question>&goal=<user_goal>
```

`ask` is the immediate question: it should be specific, self-contained, and written in natural language.
`goal` is what the user is ultimately trying to achieve, the reason they need the answer. Sharing it helps GitBook give you a better, more relevant answer. A goal is most helpful when it describes the outcome the user wants rather than restating the question. For example, with `ask=how do I create an API token`, a goal like `automate deployments from our CI pipeline` lets GitBook tailor the answer to that use case.

The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.
