> For the complete documentation index, see [llms.txt](https://docs.paragontruss.com/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://docs.paragontruss.com/layout/how-to/align-snapping-underlays.md).

# Align Snapping Underlays

## Align Snapping Underlays

When a project has more than one underlay, such as a DXF or PDF for each floor, you can move and rotate one underlay so it lines up with another underlay or with objects already in your layout. Pick a point that's in the same place on both drawings, such as a stair corner or a grid line intersection, and move the underlay so the two points meet.

Underlays use the same `Move` and `Rotate` tools as walls, beams and other layout objects.

### Move an Underlay

#### Step 1 - Select the underlay you want to move under `Snapping Underlays`, or click it in the scene

The `Snapping Underlay Properties` panel opens.

#### Step 2 - Click `Move`

`Move` is at the top of the `Snapping Underlay Properties` panel. You can also right-click the underlay and choose `Move Snapping Underlay`.

#### Step 3 - Check the underlays you want to align with under `Show Other Underlays`

`Show Other Underlays` lists every other underlay in the project, so you can show the one you're lining up with while you pick points on it. The list only appears when the project has more than one underlay.

#### Step 4 - Click the match point on the underlay you're moving

This sets the `Origin`. Use the snapping tools to lock onto an endpoint or intersection on the drawing.

#### Step 5 - Click the point where the match point belongs

This sets the `Destination`. It can be a point on another underlay or on a layout object, such as a wall corner. The underlay moves as soon as you pick the destination.

<figure><img src="https://2476274629-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2Fx4iMKVYkWjHD3vmbybWf%2Fuploads%2FpiBuOeZUL5kq5EjmH0N2%2FSnappingUnderlay_Move.gif?alt=media&amp;token=a1680ae2-d8b1-4a4f-9adf-7ebd829dfc08" alt=""><figcaption></figcaption></figure>

{% hint style="info" %}
Note

To move an underlay by a set distance instead, enter the distances in `X Translation` and `Y Translation` and click `Apply`.
{% endhint %}

### Rotate an Underlay

#### Step 1 - Select the underlay you want to rotate under `Snapping Underlays`, or click it in the scene

#### Step 2 - Click `Rotate`

You can also right-click the underlay and choose `Rotate Snapping Underlay`.

#### Step 3 - Click the point to rotate the underlay around

This sets the `Center Point`. You can pick any point, such as the match point you used to move the underlay, so that point stays where it is while the drawing turns.

#### Step 4 - Enter an angle, such as `90` in `Angle`

To turn the underlay a quarter turn, use the rotate buttons on either side of `Angle` instead: one turns it 90° counterclockwise and the other 90° clockwise.

<figure><img src="https://2476274629-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2Fx4iMKVYkWjHD3vmbybWf%2Fuploads%2FE33h8TN0RH7hkXgxMS0d%2FSnapUnderlayRotate.gif?alt=media&amp;token=417b894c-67eb-4786-98cb-6377a2a8a4ed" alt=""><figcaption></figcaption></figure>

#### Step 5 - Click `Apply`

{% hint style="info" %}
Note

The `Rotation` field is no longer in the `Snapping Underlay Properties` panel. You can still set an underlay's rotation when you upload it, and use `Rotate` to change it afterwards. Underlays can't be mirrored.
{% endhint %}


---

# Agent Instructions
This documentation is published with GitBook. GitBook is the documentation platform designed so that both humans and AI agents can read, navigate, and reason over technical content effectively. Learn more at gitbook.com.

## Querying This Documentation
If you need additional information that is not directly available in this page, you can query the documentation by asking a question.

Perform an HTTP GET request on the following URL with the `ask` and `goal` query parameters:

```
GET https://docs.paragontruss.com/layout/how-to/align-snapping-underlays.md?ask=<question>&goal=<user_goal>
```

`ask` is the immediate question: it should be specific, self-contained, and written in natural language.
`goal` is what the user is ultimately trying to achieve, the reason they need the answer. Sharing it helps GitBook give you a better, more relevant answer. A goal is most helpful when it describes the outcome the user wants rather than restating the question. For example, with `ask=how do I create an API token`, a goal like `automate deployments from our CI pipeline` lets GitBook tailor the answer to that use case.

The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.
