> For the complete documentation index, see [llms.txt](https://docs.paragontruss.com/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://docs.paragontruss.com/design/how-to/profile-truss/create-roof-trusses-with-long-span.md).

# Create Roof Trusses with Long Span

Before you begin, open Paragon Design.

A long span truss, such as a 64' commercial roof truss, needs a few changes from a typical residential truss. It carries non-residential loads, often needs larger bottom chords, and usually needs sliders at the heels. This article draws a 64' truss with a 6/12 pitch, sets its loads and analysis settings, and then fixes the checks that fail.

{% hint style="info" %}
Note

Distance fields accept values such as `64'`, `32'` or `5-1/2`. Slope fields take the rise per 12 of run, so enter `6` for a 6/12 slope.
{% endhint %}

## Draw and insert the truss

### Step 1 - Click `Create` and choose `Component`

You can also right-click empty space in the scene, or press `Ctrl + Q`, and choose `Component`. The `Component Insertion` panel opens at `Basic Shape`.

### Step 2 - Under Draw a freeform profile from scratch, enter the span, such as `64'` in `Length`

### Step 3 - Enter the pitch of the top chord, such as `6` in `Slope`

Under Profile Line, `Distance` is how far a line runs horizontally, and `Slope` is its pitch. Pressing Enter in either field adds a line straight away, the same as clicking `Add Line`, using the current values of both fields. Here, Enter adds a line at the default `Distance` of 8', which the next step removes. To set the slope without adding a line, press Tab instead of Enter.

### Step 4 - Click `Back Up` to remove the 8' line

`Back Up` removes the last line you added. The slope stays at 6/12. If you pressed Tab in the previous step, there is no line yet and `Back Up` does nothing.

### Step 5 - Enter the run to the peak, such as `32'` in `Distance`, and press Enter

Enter adds the first top chord: a 32' run at 6/12, from the left heel up to the peak at mid-span. You can also click `Add Line`.

![](https://2598702589-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FzIkcl8vW0QKiqUIx7Xdc%2Fuploads%2FTycXBn1GHr2Ttmx39XFs%2Flong-span-profile-line.png?alt=media)

### Step 6 - Click `Close Profile`

The first click adds the second top chord, from the peak down to the right heel, at the same pitch.

### Step 7 - Click `Close Profile` again

The second click adds the bottom chord and closes the profile. The panel moves to `Shape Details`.

### Step 8 - Under Left Heel and Right Heel, make sure `Run bottom chord through` is checked

For this truss, the bottom chord runs through the heel at each end. Check the box under both Left Heel and Right Heel if it isn't checked already.

### Step 9 - Click `Next`

The panel moves to `Structural Details`.

### Step 10 - Click `Load Settings`

The load settings open with the `Roof Live + Dead` section expanded.

### Step 11 - Click `One- or two-family dwelling` to uncheck it

A long span truss like this one is rarely used in a house. `One- or two-family dwelling` is under BC Live Load, in the `Roof Live + Dead` section. It appears only when the building code is not a residential code, such as IBC 2021, and it is checked by default. Unchecking it also unchecks `Use full storage load`.

### Step 12 - Check `Sprinkler Installation Load`

The `Sprinkler Installation Load` section expands and its settings become available. Leave `Sprinkler Live Load` at its default.

### Step 13 - Check `Apply along BC`

The sprinkler load now also applies along the bottom chord.

### Step 14 - Click `Change settings for this component`

### Step 15 - Click `Analysis Settings`

### Step 16 - Click `Other Settings`

### Step 17 - Check `Use Repetitive Member Increase (Cr)`

The repetitive member increase raises the design values for axial and bending checks. It may apply when a building has many of the same truss, three or more joined by sheathing and spaced no more than 2' on center.

### Step 18 - Click `Change settings for this component`

### Step 19 - Click `Insert`

## Upgrade the bottom chords

### Step 1 - Click `Analyze`

Some checks exceed their capacity. In the scene, some of the plates at the bottom chord splices don't have enough grip. Hover over a plate to see its values. To view the results, see [Run & View Component Analysis](https://docs.paragontruss.com/design/how-to/general/run-and-view-component-analysis.md).

### Step 2 - Right-click a bottom chord, such as `B1` under `Members`, or right-click it in the scene

To change all the bottom chords at once, [multi-select](https://docs.paragontruss.com/design/getting-started/tools-and-features.md#multi-select) them in the scene first, then right-click one of them.

### Step 3 - Choose `Edit Lumber`

### Step 4 - Choose `2x6` for `Dimensions`

If you changed one bottom chord, repeat Steps 2 to 4 for the other bottom chords.

### Step 5 - Close the menu, then click `Analyze` to re-analyze the truss

The larger bottom chords fix the plates at the splices, but the heels still exceed their capacity.

## Add sliders at the heels

You could upgrade the top chords to 2x6 as well, but that adds cost and weight. Top chord sliders at the heels are a better fix.

### Step 1 - Click `Edit Truss` and choose `Adjust Heels`

`Edit Truss` is the pencil icon in the top toolbar. The `Adjust Heels` panel opens in the right sidebar.

### Step 2 - Choose `Top Chord Slider` for `Left Heel Reinforcement`

### Step 3 - Choose `Top Chord Slider` for `Right Heel Reinforcement`

Leave the other settings as they are.

### Step 4 - Click `Close`

### Step 5 - Click `Analyze` to re-analyze the truss

With the sliders added, the plates at the heels pass. Zoom in on a heel to check.

{% hint style="warning" %}
Shipping and manufacturing

A truss this size may pass every check and still be impractical. Many manufacturers can't fabricate a truss this long, and shipping limits vary by region, so check your local requirements. You would often design this roof as a piggyback truss instead, so it can be shipped in pieces and assembled on site.
{% endhint %}

## Watch the video

The video shows the same steps. In the video, the line is added with `Add Line` after both values are entered.

{% embed url="<https://youtu.be/gAEodRoDZnk>" %}

<details>

<summary>Video Transcript:</summary>

Welcome! In this video, we’ll walk through creating a long span truss and discuss a few design considerations specific to shipping and manufacturing these components. Let’s get started!

Start by opening the component creation panel. Here we will set the length to 64 feet. Next we’ll add a 32 foot profile line. And we will set the slope to be six twelve. Now Click Add Line. To close this component out we can Click the close profile option 2 times and move on to the shape details. For this demo we want the bottom chord to run through the heel so make sure those checkboxes are selected. And then click next.

In the Structural Details sections navigate to the bottom of this panel and access the Load Settings. Typically, these long span trusses are not used in residential settings so we will make sure “One-or-two family dwelling” is deselected. Next, make sure “Sprinkler Installation Load” is selected and click the “Apply along Bottom Chord” checkbox.

Now click ‘Change the Settings for this Component’ to wrap up our changes to the Load Settings. Open the Analysis Settings and navigate to the “Other Settings” section. For this scenario we are going to say the structure has multiple of the same truss so we will select “Use repetitive Member Increase” and click “Change Settings for this Component.” Now we can insert the truss.

Let’s analyze the truss and see if any checks are over capacity. Select Analyze from the menu to run the check. For all trusses we want to make sure each connection is where we want them to be. The analysis shows some checks are exceeded. We can see some of our plates on the bottom chords don’t have enough grip. Hover over one to show this data.

Let's select the bottom chords and upgrade them to be 2x6. Next we will right click, then select edit lumber, here we will select 2x6 from the list. To see these changes take place we need to re-analyze the truss. After the truss has been re-analyzed, we can see that this solved our issues at the splices, but we still show that the heels are exceeding capacity.

We could upgrade the top chords to be 2x6 and that would solve the load issue. But that would increase both cost and overall weight. A better solution is to add sliders to the corners of the bottom chord. Click edit truss from the actions toolbar. Then click adjust heels. Here we can set the Left heel reinforcement to top chord slider. And we can do the same for the right heel reinforcement. We will leave the other properties set as they are. Click close.

We will now re-analyze the truss with the sliders added. Looks like this worked. Let's zoom in to one of the plates at the heel. We should see no issues with the plates, now that we added these additional sliders.

Now we know this truss will work for the given situation, but certain details must be considered when designing a truss this size. Many manufacturers do not have the ability to fabricate this truss, let alone ship it. Shipping limitations vary, so be sure to check your regional requirements. Given this information we would likely design a piggyback truss to allow shipping and on site assembly. We will cover piggyback trusses in a separate video.

Thanks for watching !

</details>


---

# Agent Instructions
This documentation is published with GitBook. GitBook is the documentation platform designed so that both humans and AI agents can read, navigate, and reason over technical content effectively. Learn more at gitbook.com.

## Querying This Documentation
If you need additional information that is not directly available in this page, you can query the documentation by asking a question.

Perform an HTTP GET request on the following URL with the `ask` and `goal` query parameters:

```
GET https://docs.paragontruss.com/design/how-to/profile-truss/create-roof-trusses-with-long-span.md?ask=<question>&goal=<user_goal>
```

`ask` is the immediate question: it should be specific, self-contained, and written in natural language.
`goal` is what the user is ultimately trying to achieve, the reason they need the answer. Sharing it helps GitBook give you a better, more relevant answer. A goal is most helpful when it describes the outcome the user wants rather than restating the question. For example, with `ask=how do I create an API token`, a goal like `automate deployments from our CI pipeline` lets GitBook tailor the answer to that use case.

The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.
