> For the complete documentation index, see [llms.txt](https://docs.paragontruss.com/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://docs.paragontruss.com/design/how-to/general/using-special-plate-types.md).

# Using Special Plate Types

Before you begin, select a profile truss, such as a `Common` truss.

In addition to rectangular plates, Paragon supports two specialized plate shapes: T-Plates and Bevel Plates. You can insert these plates manually, convert an existing plate pair to a single, or allow plate upgrades during analysis to select them automatically. Design only offers the special plate sizes included in the plate list assigned to the truss.

Special plates currently come from MiTek:

* **T-Plates:** `MT18HS` in `T6x10`, `T6x12`, `T7x10` and `T7x12`.
* **Bevel Plates:** `MT20` in `BV4x8`, `BV5x10.5` and `BV6x12`. Each bevel plate comes as a left-handed and a right-handed plate, shown with `LH` or `RH` at the end of the size, such as `BV4x8LH`.

## Add Special Plates to Your Plate List

* Use [Materials](https://docs.paragontruss.com/materials/) to add special plate types like bevel plates and T-Plates to your [plate lists](https://docs.paragontruss.com/materials/how-to/plate-lists)

In the plate list, a bevel plate has one row, such as MT20 BV4x8. Checking it adds both the left-handed and the right-handed plate.

## Check Which Plate List Your Truss Uses

### Step 1 - Select the truss, click `Truss Settings`, and choose `Material Settings`

### Step 2 - Find the `Plate List`, then click `Cancel`

If the truss uses a plate list without special plates, select a `Plate List` that includes them and click `Change settings for this component` instead.

## Insert a T-Plate or Bevel Plate

### Step 1 - Click `Create` and choose `Plate Pair`

### Step 2 - Choose a plate type that has special sizes, such as `MT18HS` for `Plate Type`

### Step 3 - Choose a special size, such as `T6x10` for `Plate Dimensions`, then click `Front/Back`

`Plate Dimensions` lists every size available for that plate type in your plate list. T-Plates start with `T` and Bevel Plates begin with `BV`.

### Step 4 - Click the joint where the plate goes

A T-Plate is inserted at 0°, a left-handed bevel plate at 135°, and a right-handed bevel plate at 45°. The new plate pair is selected, allowing you to move, rotate, or change its `Plate Angle`, immediately.

![](https://2598702589-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FzIkcl8vW0QKiqUIx7Xdc%2Fuploads%2F36n3XyYevQeX1Or3ldrV%2Fspecial-plates-insert.gif?alt=media)

## Change a Plate Pair to a Special Plate

### Step 1 - Click `Analyze` to plate the truss

When your plate list includes special plates, **plate upgrades during analysis** automatically add T-Plates and Bevel Plates where applicable.

### Step 2 - Select a plate pair, such as `2` under `Plates`, or click it in the scene

### Step 3 - Choose `MT18HS` for `Plate Type`, then choose `T6x10` for `Dimensions`

Changing the `Plate Type` keeps the plate's current size if it's available for the new type. Otherwise, Paragon selects the nearest available size. Then choose the special size for `Dimensions`.

![](https://2598702589-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FzIkcl8vW0QKiqUIx7Xdc%2Fuploads%2FPu4udYpG5F7Gbp0y9CuO%2Fspecial-plates-properties.png?alt=media)

### Step 4 - Click `Analyze` to check the new plate

Changing a plate pair locks it in place, so analysis preserves the plate configuration you set.


---

# Agent Instructions
This documentation is published with GitBook. GitBook is the documentation platform designed so that both humans and AI agents can read, navigate, and reason over technical content effectively. Learn more at gitbook.com.

## Querying This Documentation
If you need additional information that is not directly available in this page, you can query the documentation by asking a question.

Perform an HTTP GET request on the following URL with the `ask` and `goal` query parameters:

```
GET https://docs.paragontruss.com/design/how-to/general/using-special-plate-types.md?ask=<question>&goal=<user_goal>
```

`ask` is the immediate question: it should be specific, self-contained, and written in natural language.
`goal` is what the user is ultimately trying to achieve, the reason they need the answer. Sharing it helps GitBook give you a better, more relevant answer. A goal is most helpful when it describes the outcome the user wants rather than restating the question. For example, with `ask=how do I create an API token`, a goal like `automate deployments from our CI pipeline` lets GitBook tailor the answer to that use case.

The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.
