> For the complete documentation index, see [llms.txt](https://docs.paragontruss.com/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://docs.paragontruss.com/design/how-to/general/adjust-plate-placement.md).

# Adjust Plate Placement

Before you begin, select a profile truss, such as a `Common` truss.

A plate pair can fail its checks even when it is big enough, because of where it sits on the joint. It may not grip one of the members enough. Moving the plate a little, so it covers more of that member, often fixes this without a bigger plate.

## Move a Plate Pair to Fix a Failing Plate Check

### Step 1 - Click `Analyze`, then find the truss's `Maximum JSI` in the component properties

Analysis plates the truss and checks every plate pair. When it finishes, the truss is selected and its properties show the `Maximum JSI`, the highest joint stress index of any plate pair on the truss. A value over 1.00 means at least one plate pair is failing. The analysis results show which plate pair is failing and which check it fails, such as grip on one of its members.

### Step 2 - Select the plate pair, such as `2` under `Plates`, or click it in the scene

Plate pairs are named after the joint they sit on, so `Plate Pair 2` is the plate at joint 2. When you select a plate pair, arrows appear beside it in the scene.

### Step 3 - Click `Design Values` in the `Plate Pair Properties`

Above `Design Values`, `Max Jsi` is this plate pair's highest joint stress index and the load case it comes from, such as "1.03 from Load Case 2". Over 1.00, the plate pair fails. In the scene, the plate also shows a percentage over each member it grips, so you can see which member it needs to cover more of. `Design Values` shows the plate's allowable values.

### Step 4 - Click the arrow on the side you want to move the plate toward

Each click moves the plate pair one step in that direction. You can also drag an arrow to move the plate further. While you move it, live plating checks its grip on each member it touches, so you can watch the values improve.

To change the size of each step, click the gear icon next to the arrows and enter a `Distance`. Drag the rotate handle around the plate to rotate it, or enter an angle in `Plate Angle`.

{% hint style="info" %}
Moving a plate pair locks it, so the next analysis keeps it where you put it instead of re-plating that joint. To let the analysis plate that joint again, right-click the plate pair and choose `Unlock Plate Pair`.
{% endhint %}

### Step 5 - Click `Analyze` to re-analyze the truss, then find the `Maximum JSI` again

If the `Maximum JSI` is now 1.00 or less, the plate pair passes. If it still fails, move it again or choose a larger size for `Dimensions` in the `Plate Pair Properties`.

![](https://2598702589-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FzIkcl8vW0QKiqUIx7Xdc%2Fuploads%2Fytej0wVVaCObOanGxQii%2Fplate-placement-reanalyzed.png?alt=media)

## Watch the Video

In this video, a corner girder's plate pair is at 103% because it doesn't grip the end vertical enough. Moving it a little to the right fixes it without a bigger plate.

{% embed url="<https://youtu.be/5zWkDN2wm-s>" %}

<details>

<summary>Video Transcript:</summary>

In this video we are going to take a look at one of the corner girders to see what needs to be adjusted to pass the checks. We'll take a look at D-CG6. We will look to see why it is exceeding capacity.

Let's click on our plate pair and see what is taking place. Looks to be that our plate pair is at 103%.

It looks to be failing by grip on the end vertical. Let's try and adjust it. Click on the plate and click on the arrow to move the plate to the right. As we move it, the values are looking better. Seems as a little movement to the right fixed this without needing to increase the size of the plate.

We hope this video has shown you how a simple adjustment can take care of an exceeded plate value by moving it around to better fit the component.

Re-analyze this and looks like we are good.

Thanks for watching!

</details>


---

# Agent Instructions
This documentation is published with GitBook. GitBook is the documentation platform designed so that both humans and AI agents can read, navigate, and reason over technical content effectively. Learn more at gitbook.com.

## Querying This Documentation
If you need additional information that is not directly available in this page, you can query the documentation by asking a question.

Perform an HTTP GET request on the following URL with the `ask` and `goal` query parameters:

```
GET https://docs.paragontruss.com/design/how-to/general/adjust-plate-placement.md?ask=<question>&goal=<user_goal>
```

`ask` is the immediate question: it should be specific, self-contained, and written in natural language.
`goal` is what the user is ultimately trying to achieve, the reason they need the answer. Sharing it helps GitBook give you a better, more relevant answer. A goal is most helpful when it describes the outcome the user wants rather than restating the question. For example, with `ask=how do I create an API token`, a goal like `automate deployments from our CI pipeline` lets GitBook tailor the answer to that use case.

The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.
